EQ 3100
AUTOMATIC WHEEL BALANCER 3D VIDEO LASER POINTER
49
ROUTINE MAINTENANCE OF THE WHEEL BALANCER
MONITOR
Warning
The manufacturer declines all responsibility in the event of claims resulting from the use of non-original spare parts
or accessories.
Unplug the machine from the socket and make sure that all moving parts have been locked before performing any
adjustment or maintenance operation.
Do not remove or modify any part of the machine (except for service interventions).
Caution
Keep the work area clean.
Never use compressed air and/or jets of water to remove dirt or residues from the machine. Take all possible
measures to prevent dust from building up or rising during cleaning operations. Keep the wheel balancer shaft,
the securing ring nut, the centering cones and flange clean. These com¬ponents can be cleaned using a brush
previously dripped in environmentally friendly solvents. Handle cones and flanges carefully so as to avoid accidental
dropping and subsequent damage that would affect centring accuracy. After use, store cones and flanges in a
place where they are suitably protected from dust and dirt. If necessary, use ethyl alcohol to clean the display
panel. Perform the calibration procedure at least once every six months.
The machine’s control monitor
is illustrated in figure below.
The control monitor is used
by the operator to view the
applied controls and the data
entered with the keyboard.
The same control panel
displays the balancing results
and machine messages.
The control key functions are
described below.
Pos. Description
1
Status icon band.
2 – 3 Display shows unbalance value inside – outside.
4
Imbalance Position indicator. Position depends by the
Program and Wheel Type selected.
5
Control icon band.
6 – 7 Indicator shows angular unbalance position inner - outer.
8
Wheel dimensions data band.
Summary of Contents for EQ 3100
Page 52: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 52...
Page 53: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 53...
Page 67: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 67...
Page 69: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 69...
