EQ 3100
AUTOMATIC WHEEL BALANCER 3D VIDEO LASER POINTER
57
Position of the weights in the various Program Types along the section of the rim
Angular position of the balancing weights in the various Program Types
Note (1): if the data acquisition system is disabled, the angular position of the weight will be in the 6 o’clock position.
In the table, the symbol «H12» indicates an angular position at 12 o’ clock, the symbol «H6» indicates an angular
position at 6 o’ clock, while the symbol «L» indicates a position designed by laser pointer (the laser is active when
in the LAS=ON settings).
The machine data acquisition systems are defined as follows:
•
Semi-automatic when the Distance and Diameter data are automatically acquired with the Distance/Diameter
sensor while the data on the width must be manually entered;
•
Automatic when all data of the rim is automatically acquired with the two sensors.
Machine data
acquisition
system
Program Type
STD, ALU1,2,3,4,5
ALS1
ALS2
Internal plane
External plane
Static plane
Internal plane
External plane
Static plane
Internal plane
External plane
Static plane
Semi-
automatic
H12
H12
H12
H12
Sensor-rim
contact
point(1)
H6 or L
Sensor-rim
contact
point(1)
Sensor-rim
contact
point(1)
H6 or L
Automatic
H12
H12
H12
H12
Sensor-rim
contact
point(1)
H6 or L
Sensor-rim
contact
point(1)
Sensor-rim
contact
point(1)
H6 or L
Laser
H12
H12
H12
H12
H6
Sticker
H6 or L
L
Sticker
L
Sticker
H6 or L
Summary of Contents for EQ 3100
Page 52: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 52...
Page 53: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 53...
Page 67: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 67...
Page 69: ...EQ 3100 AUTOMATIC WHEEL BALANCER 3D VIDEO DISPLAY LASER POINTER 69...
