CLAS OE 3004, Manual

 OE  3004 

 DIGITAL MULTIMETER CAT. III 

Non-Contact AC Voltage Detection

Press and hold down the AC Voltage Detection Button, move the top of the meter close to the object to be tested. 

When the meter detects AC voltage, the built-in buzzer will sound and the AC Voltage  Detection lndicator will 

light.

Note:

1. To avoid electric shock, do not touch any naked conductor with hand or skin.

2. Because of the meter's detection limit, a line ( or conductor) under test may be live even if the buzzer does not 

sound and the AC Voltage Detection lndicater does not light.

3. Before use, verify the meter's operation by detecting a known AC voltage.

4. When you just press and hold down the AC Voltage Detection Button, the buzzer may sound one or two beeps 

and the AC Voltage Detection lndicater may light briefl y. lt is normal and doesn't matter.

5. Don't use the meter in an environment with intense electromagnetic fi eld.

Live AC Wire Detection

Connect the plug of a test lead to an input terminal of the meter, and connect the probe tip of this test lead to the 

line's conductor to be tested. Press and hold down the AC Voltage Detection Button. When the meter detects AC 

voltage, the built-in buzzer will sound and the AC Voltage Detection lndicator will light.

Note:

1. To avoid electric shock, do not touch any naked conductor with hand or skin.

2. Because of the meter's detection limit, a line (or conductor) under test may be live even if the buzzer does not 

sound and the AC Voltage Detection lndicator does not light.

3. Before use, verify the meter's operation by detecting a known live ac wire (or conductor).

4. When you just press and hold down the AC Voltage Detection Button, the buzzer may sound one or two beeps 

and the AC Voltage Detection lndicator may light briefl y. lt is normal and doesn't matter.

5. Don't use the meter in an environment with intense electromagnetic fi eld.