OH 0266
PIT JACK 600kg
WARNING
SPECIFICATIONS
- foot control
- chromed rod
- overload safety
- deadman lowering control
- 4 swiveling wheels
- height mini: 1100mm
- height maxi.: 1900mm
- weight: 34kg
- dimensions: 1120x230x280mm
- standards: 2006/42/EC, EN ISO 12100:2010 and EN 1494:2000+A1:2008
INTRODUCTION
This jack is a removal hydraulic one that with the following advantage compact construction:light
in weight,long lift range,fast in lift,replaceable in connection part,firmly and reliable in connection
of ADT and so on.
It can be used when assembling and disassembling the removal parts and structural parts which
need to be lifted,descended transported. It is the ideal tool for assembling and repairing in motor
repair shop, mobile shop.
Read and understand the instructions and instructions in this manual before use.
Do not exceed the rated capacity of the pit jack.
Check that the pit jack’s lifting force is compatible with the weight of the vehicle.
Always make sure that you have sufficient working space to correctly manoeuvre around the pit
jack.
Use the pit jack on a flat and solid surface capable of supporting the load.
Do not use in difficult conditions: snow, strong wind, heavy rain.
The pit jack is a lifting device only. Use support engine to support the vehicle parts.
Do not allow anyone to sit under the vehicle until it is supported by jack stands.
Centre the load on pit jack head before lifting.
Do not lift people.
Do not put the pit jack in contact with food.
Keep out of the reach of children.
It is strongly recommended to wear safety clothing (gloves, shoes).
The pit jack is made to lift part of vehicles, any other use that could lead to dangerous situations
is forbidden.
No modifications must be made to the pit jack.
Failure to observe these warnings may result in personal injury or property damage.
Always inspect the pit jack before use. Do not use the pit jack if a malfunction is detected.
Do not store high up
Any modification of the product would result in the cancellation of the guarantee.
