CLAS PE 6001, Manual

PE 6001

DOUBLE SCISSOR LIFT 3T

CONSERVING THE MANUAL 

The lift is designed and manufactured according to the European Standard 

Manufacturer reserves the right to make changes to the user manual if there are technological 

improvements.

OPERATOR:

person authorized to use the lift

MAINTENANCE FITTER:

person authorized for routine maintenance on the lift.

This manual has been prepared for those who are expert in the use of the lifters, operators 

and technicians responsible for the routine maintenance. 

Workers should read carefully the ‘Maintenance & User Manual’ before carrying out any 

operation on the lift. This manual contains important information regarding: 

Personal safety of the operator and the maintenance workers. 

Lift safety 

The safety of the lifted vehicles 

This manual is an integral part of the lift. 

The manual must be kept in the vicinity of the lift, so that the operator and maintenance staff can 

easily locate and consult the manual at any time. 

We particularly recommended reading Chapter 3 which contains important information and 

safety warnings.

Lifting, transport, unpacking, assembly, installation, starting up, initial adjustment and 

testing, extraordinary maintenance, repair, overhauls, transport and dismantling of the lift 

are all operations that must be performed only by specialized personnel or by licensed 

dealer authorized by the manufacturer. 

The manufacturer declines all responsibility for injury to persons and damages to vehicles 

and objects when any of the above mentioned operations has been performed by unauthorized 

personnel or when the lift has been subject to improper use.

This manual indicates: the operative and safety aspects that may be useful to the operator 

and maintenance workers. For a better understanding of the structure and its functioning, 

workers must carefully read the ‘Maintenance & Use Manual’. 

In order to understand the terminology used in this manual, maintenance and repair personnel 

must have the ability to interpret correctly the drawings and the descriptions contained in the 

manual and be able to read and understand correctly the language of the country in which 

the lift has been installed and the manual has been written. They must have the ability to read 

technical drawings and have a specialized knowledge both in mechanical and engineering field.

MANUAL INTRODUCTIONS