LONG DISTANCE CALL
If there is a long distance incoming
call, "
LONG DISTANCE
" apears
alternatively with the caller's name.
DIALING FROM
CALLER ID
1.
When reviewing a Caller ID
record, press [
DIAL
] button to
dial the number shown on the
LCD display. If the number
format of the Caller ID is not
adjustable, the LCD display
shows “
PICK UP HANDSET
”.
Lift the Handset to dial the
number.
2.
If you have pre-stored an area
code, the number format of the
Caller ID is adjustable (see the
"
Important
" section on page 12).
The LCD display shows “
PICK
UP OR ADJ
” after you press
[
DIAL
] button.
3.
Press [
DIAL
] button again to
change number format among:
a) 7 digits (phone number)
b) 10 digits (area code +
phone number)
c) 11 digits (1 + area code +
phone number)
4.
Lift the Handset to dial the
number shown.
IMPORTANT :
a)
You must pre-store an area
code before you can adjust the
number format. Refer to the
“
Set Area Code
” section on
page 8.
b)
If you have set your local area
code, area code of all incoming
numbers will be compared
against your pre-set local area
code to determine if it is a local
call.
c)
Only the last 7 digits of the
incoming number will be shown
on the LCD display if it is a local
call. If it is not a local call, 11
digits (1 + area code + phone
number) will be shown when
dialing back.
12:00AM 01/01 CALL #80 NEW
249-342-363
LONG DISTANCE
Operation
11
DELETING CALLER ID
RECORD
When the Caller ID record is full, it
automatically deletes the oldest
Caller ID record as a new call comes
in. You can also delete individual
call or all calls in the Caller ID record.
To Delete A Caller ID Record
1.
While reviewing a Caller ID
record, press [
DELETE
] button
and the LCD display shows
“
DELETE CALL?”
.
2.
Press [
DELETE
] button again
to delete.
To Delete All Caller ID Records
1.
While reviewing a Caller ID
r e c o r d , p r e s s a n d h o l d
[
DELETE
] button for about 3
seconds. “
DEL ALL CALLS?
”
appears on the LCD display.
2.
Press [
DELETE
] button again
to delete all records.
CALLER ID ON CALL
WAITING
If you have subscribed to the Caller
ID on Call Waiting service, ML-300ad
allows you to read the information
of the new caller from the LCD
display when you are on the phone.
IMPORTANT :
If there is more than one phone
connected to the line in your house,
ML-300ad will not receive Call
Waiting information when any of the
other phones are off-hook at the
same time.
1.
When you are on the line and
hear a Call Waiting tone, the
new caller’s name and/or
number appear on the LCD
d i s p l a y. A n i c o n “ C . W. ”
indicates it is a waiting call.
2.
Press [
FLASH
] button to switch
to talk with the new caller and
put the first caller on hold.
3.
Press [
FLASH
] button again to
resume the phone conversation
with the first caller and to put
the new caller on hold.
12:00AM 01/01 CALL #80 NEW
C.W.
249-342-363
JOHN SMITH
Operation
12
