8
Maintenance
Removing and cleaning the grease filter
o
First remove the grease filter by sliding the securing nibs at the sides of the grille
on the underside of the rangehood.
o
Soak the grease filter in hot water and washing up liquid for about an hour.
o
Rinse it off thoroughly with hot water.
o
Repeat the process if required.
o
IMPORTANT:
Let the grease filter dry thoroughly before refitting it in the
rangehood.
o
Never attempt to use your rangehood without the grease filter in place.
Changing a light bulb (Part number: SYKL10
– LED LIGHT)
o
IMPORTANT
– Always ensure the rangehood has been
switched off before carrying out any work, including
replacing light bulbs.
o
Prior to removing the LED light, ensure that it has
cooled down.
o
Remove the grease filter by sliding the securing nibs at the sides of the grill on
the underside of the rangehood.
o
Disconnect the internal plug leading to the LED light
o
Squeeze the spring clips holding the LED light in place and draw the assembly
out of the rangehood
o
Replace in reverse order using
only
genuine spare part
SYKL10
.
Summary of Contents for CLRH90GLSS
Page 23: ......
