16
o
Connect a 150 mm ducting hose to a discharge outlet that is suitable for cooking
vapours. Please note that the ducting hose is not supplied with the appliance but
one can be obtained from the Retail outlet where you purchased your appliance.
o
The maximum distance between the coupling and your discharge outlet should
be 3 metres, with one 90 degree bend. For each additional 90 degree bend, the
maximum distance is reduced by a further metre.
o
Before fixing the rangehood into the kitchen unit, you should connect the other
end of the ducting hose to the coupling in the top of the cooker hood.
Attaching the glass
Remove the metal grease filters from the rangehood. Slacken both anchoring
screws “F”
Place the glass ‘Q’ on the upper shelf of the hood, pushing it in towards the wall.
Tighten
the screws ‘F’ again in the hole and connect them to the unit.
Take care that the anchoring corner is firmly fastened, tightening it well.
Re-
insert the ventilation tube with the coupling tube ‘N’.
IMPORTANT - Do not overtighten these screws or you may damage/distort the
unit.
Summary of Contents for CLRH90GLSS
Page 23: ......
