6
Using your rangehood
Before first use
IMPORTANT: This process must be followed before the rangehood is used for the
first time.
You should use a mild liquid detergent and a damp cloth on all the external areas of
your rangehood before it is used for the first time. This will help to remove any residues
from the manufacturing process.
To use your rangehood
IMPORTANT: Ideally you should switch on your rangehood ten minutes before
you start to cook, or at the very least when you begin cooking. You should also
run your rangehood for ten minutes after you have finished cooking.
1) Make sure it has been properly installed.
2) Find the CONTROL PANEL. It is located on the rangehood’s front surface near the
upper right corner of the unit.
3) The CONTROL PANEL contains switches as shown in the Figure below.
These perform separate functions. You will need to understand what
both switches do before you attempt to use your rangehood.
Key:
‘W’ - Motor operation:
1 - low speed, 2 - mid speed, 3 - high speed.
‘U’ – Light ‘on/off’ button - This button controls the light
Summary of Contents for CLRH90GLSS
Page 23: ......
