7
IMPORTANT: Ideally you should switch on your rangehood ten minutes before
you start to cook, or at the very least when you begin cooking. You should also
run your rangehood for ten minutes after you have finished cooking.
Cleaning your rangehood
IMPORTANT: Before cleaning, always ensure that you have
switched your rangehood off
at the omni-polar switch, set at the
wall from the cable.
Cleaning
o
Clean the external parts of your rangehood with mild liquid detergent and a new
damp cloth.
o
Never use abrasive powder, corrosive solvents or brushes.
o
Never
insert pointed objects into the motor’s protective grid.
o
Only clean the control panel and grease filter grill with mild liquid detergents and
a new damp cloth.
o
If you are using the appliance in recirculation mode, then be sure to replace the
carbon filters at the recommended interval (
see section on “Fitting the carbon
filter” on page 9). A build up of grease could cause a fire hazard.
o
Never attempt to clean the area above the grease filter.
The Grease filter
o
Your rangehood includes a grease filter which helps to absorb grease particles to
protect your kitchen and furniture from greasy residues.
o
Your rangehood includes a metal filter which can be periodically washed.
o
The filter may become flammable if it becomes saturated with greasy residue.
o
To prevent this fire hazard, the metal filter should be cleaned regularly.
Depending on use, this should be done every two months, using hot water and
normal washing-up detergent.
IMPORTANT:
Do not wash the grease filter in a dishwasher as the chemicals can
cause damage.
Summary of Contents for CLRH90LSS
Page 22: ......
