E
N
G
LI
S
H
ENGLISH
56
b)
BND button as a search function during MP3 playback:
Direct input of the track number for CDs in MP3 format:
1. Press the BND button once. The letters „TRK 000“
appear in the display. Depending on the number of
tracks stored on the CD, the highest „0“ fi gure that
can be set fl ashes.
0-9 tracks = 00
0
; 10-99 tracks = 0
0
0;
100 tracks or more =
0
00
2. With the help of the +/- buttons you can now enter a
track number between 0 and 9.
3. Press the BND button once. The next smallest „0“
fi gure fl ashes. Please continue as described under
section 2.
4. Press the BND button again briefl y in order to enter
a fi gure in the units column.
5. The input of the track number is completed by
pressing the SEL button. Immediately after this the
selected track is played.
NOTE:
• It is not possible to guarantee that CDs created by the
user can be played back due to the large variety of
software and CD media available.
• During normal playback mode with CDs in MP3
format you can jump 10 tracks forwards or backwards
using the LOC/-10 - and +10 buttons.
7./8.
I
/
I Buttons TRACK UP/DOWN
In CD mode:
Press the
I
or
I
button briefl y to jump forwards or
backwards. If you would like to scroll the titles of the tracks
keep the
I
or
I
arrow button pressed.
9.
TUNE Control
By turning the TUNE control you can set the desired radio
frequency. The current frequency is shown in the display.
10.
+10 button
(only in MP3 mode)
Press the +10 button. The device jumps forward by
10 tracks (provided that there are more than 10 tracks
stored on the MP3 CD).
11.
II Button
Press the
II
button to interrupt playback of the CD (pause
function). Press this button again to continue listening to
the CD.
NOTE:
Playback of CDs produced by the user cannot be guaran-
teed due to the large variety of software and CD media
available.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music
in MP3 format. The device also supports all standard CD
types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks can
be compressed and stored on these CDs. Your machine de-
tects an MP3 CD automatically (MP3 appears in the display).
Please
note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and
self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not
a malfunction of the device
.
12.
LOC/-10 Button
a)
Radio Operation
• In regions where the signal is too strong, press the
LOC/-10 button to improve reception. The letters
„LOC“ appeared in the display.
• Press the LOC/-10 button again to return to the
DISTANT mode. Reception is now improved in
regions where the signal is too weak. The letters
„LOC“ disappear from the display.
b)
MP3 Operation
Press the LOC/-10 button. The device jumps back by
10 tracks (provided that there are more than 10 tracks
stored on the MP3 CD).
13.
LOU/AF Button
a) Switching the LOUDNESS function on and off. Keep
the LOU/AF button pressed down fur approximately 3
seconds.
When the volume is low the LOUDNESS function
(LOUD ON) expands the sound characteristics by
increasing the treble and bass sounds.
b)
Radio Operation
AF
(Alternative Frequencies)
REG
Function
AF
is a function that works with the help of RDS (
R
adio
D
ata
S
ystem) and can only be used with FM stations.
The radio searches in the background for the best fre-
quency reception of the station that has been tuned into.
If the AF function has been switched on, the radio con-
tinuously tests the signal strength of the AF frequency.
The test interval for each AF frequency depends on the
signal strength of the current station and varies from a
few minutes in the case of a strong signal to a few sec-
onds in the case of weak signals. Whenever the new AF
frequency is stronger than the station currently set, AF
appears in the display together with the AF frequency
for a short time. Turn the TUNE control to set the AF
frequency.
The AF function is activated by briefl y pressing the A.F
button and the status of the AF function is shown in the
display by an AF symbol.
05-AR 735 CD.indd 56
05-AR 735 CD.indd 56
17.10.2008 12:36:37 Uhr
17.10.2008 12:36:37 Uhr
