Commissioning
1. Fully unwind the mains cable.
2. Attach a nozzle.
Comb nozzle: you can comb your hair while drying it.
Curler nozzle: dry your hair in a curly condition. Press the button above the
operating switch to wind up the curls.
3. Set the voltage changeover switch to 230 V or 120 V as required.
4. Insert the mains plug into a mains socket (230 V or 120 V as required).
5. Setting the Temperature Level
Position 0: OFF
Position *: COOL-Shot (With this switch it is possible to interrupt the heating
process so that the air can be mixed according to indivi-
dual requirements.)
Position 1: medium temperature for gentle drying and shaping
Position 2: high temperature for rapid drying
Cleaning and care
Clean the air suction opening from time to time with a fine brush. Clean the hou-
sing with a soft, dry cloth without additives.
Removing the air suction cover
Remove the cover after turning the cap through approximately 30 degrees in a
clockwise direction.
This device conforms to the CE guidelines on interference suppression and low
voltage safety and has been constructed in accordance with the latest safety
standards.
Technical alterations may be made without notification!
Guarantee
Our appliances are guaranteed for a period of 12 months from the date of
purchase (receipt).
Faulty appliances will be repaired or replaced free of charge if these are attribu-
ted to faulty material or manufacture.
The guarantee will be invalidated if the appliances are tampered with.
For repairs within the guarantee period, please take the complete appliance with
the receipt to the place where it was purchased.
13
GB
26120-05-HAS 2386 TS 29.03.2001 15:58 Uhr Seite 13
