Operation
Illustration of the controls
1 Toasting top
5 Slide lever
2 Toasting slot
6 Control lamp
3 Browning control
7 Defrost button
4 Stop button
8 Crumb drawer
(on the back of the machine)
1. Only connect the unit to a properly installed and earthed power socket
(230 volts, 50 Hz).
2. Set the desired level of toasting with the selector (3). In case of doubt, choose
another setting and repeat the procedure.
3. Insert 1 slice of bread per toasting slot and push down the slide with the lever
(5) until it clicks into place.
4. The unit starts to toast and switches off automatically at the end. The slide pops
up automatically.
5. In order to interrupt the toasting in advance, press the
button (4).
6. Let the appliance cool down before putting it away or cleaning it.
Roasting Attachment:
For roasting rolls, for example, use the roasting attachment (1). Do not place the
food to be roasted directly on the toast slit!
Defrost Button:
In order to defrost frozen slices of bread press the
button (7). The control lamp
(6) lights up. Defrosting finishes automatically.
Cleaning
•
Pull the mains plug out of the mains socket before you clean the unit and allow
the unit to cool down.
•
Only use a slightly damp cloth to clean the outside of the unit.
•
Do not use abrasive or aggressive cleaners.
•
Pull the crumb tray (on the back of the machine) out, remove any bits of bread
and put the tray back in.
This appliance conforms with the CE directives for radio interference suppression
and low-voltage safety and has been built to meet current safety requirements.
Subject to technical changes without prior notice!
26
GB
38490-05-TA 2532 23.12.2002 11:07 Uhr Seite 26