32
TG3697_IM
12.03.18
• Cleaning and user maintenance shall not be made by children
unless they are older 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than
8 years.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2.
Remove all packaging materials like foils, filling materi
-
als, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
4. If there are missing parts or obvious damage, do not use
the appliance. Return it to your retailer immediately.
NOTE:
There may still be dust or production remains on the
appliance. We recommend that you clean the appliance
as described under “Cleaning”.
Overview of the Components /
Scope of Delivery
1 Handle
2 Griddle
3 Socket for thermostat
4 Bamboo case
5 Grease trough
6 Fat collecting pan
7 Mains plug
8 Mains lead
9 Pilot lamp
10 Temperature control
11 Thermostat
12 Temperature sensor – measures the temperature of the
plate
Electrical Connection
Power Requirements
The appliance can consume a total of 1800 W. With this
connected load a separate supply line protected by a 16 A
household circuit breaker is recommended.
CAUTION: Overload!
• If you use extension leads, these should have a cable
cross-section of at least 1.5 mm².
• Do not use any multiple sockets, as this appliance is
too powerful.
Connection
• Make sure that the appliance is switched off. The tem-
perature control must be set to “
0
”.
• Make sure that the iron voltage (see name plate) and the
line voltage match.
• The mains plug should only be inserted into a correctly
installed socket with earthing contact.
Before Initial Use
1. Operate the appliance for around 10 minutes on the
highest setting (see “Initial Operation”).
NOTE:
This process normally produces a little smoke and
some smells. Provide sufficient ventilation.
2. Let the appliance cool down completely.
3. Wipe the grill surfaces with a damp cloth.
Your appliance is now ready to use.
Initial Operation
1. Place the griddle in the bamboo case. To do this, insert
the socket for the thermostat in the opening in the
bamboo case. Place the feet of the griddle in the opening
of the case.
2. Place the appliance on a level, water and heat-resistant
surface. The surface should be easy to clean as spatter-
ing is unavoidable. If resting on a sensitive surface, place
a heat-resistant plate beneath it.
3. Please ensure that the temperature regulator is turned to
“
0
” (off) and insert it into the socket of the thermostat.
CAUTION:
If the thermostat is not
inserted correctly, this
may lead to abnormal
heating, of which the
consequence may be
damage or accidents.
You should therefore en-
sure that the thermostat
is inserted correctly.
4. Connect the appliance to a properly installed power
socket.
Summary of Contents for TG 3697
Page 55: ......
Page 56: ......
Page 57: ......
Page 58: ...TG3697_IM 12 03 18 Stand 01 2018 TG 3697 Internet http www clatronic germany de Made in P R C ...
