Chapter 3 refereNCe
| 17
The CLP (Clap) settings add a short reverb
phase after sawtooth cycles, which might be
the thing to create a good clap sound . The
higher the number, the longer the tail .
Range:
Ad
,
LFO1-3
,
CLP1-9
Decay
The Decay parameter defines
how much time it takes for the
level to drop to zero after the
envelope has reached the maximum level
or during the cyclic repeats . The higher the
value, the longer the noise .
Hold Shift and turn the Dial to quickly
choose between the exponential, linear or
a gated response of the noise envelope
decay.
Range:
0-50E
,
0-50L
,
0-50
Dec Lo (Type/Dyn)
This parameter can activate a second decay,
which is dynamic and will be gradually
introduced when you use less striking force .
This decay time can be either longer or
shorter than the “original” decay, and shares
the response characteristic of the Decay
parameter .
M
At approx. 25% of the maximum velocity,
the Decay time is fully replaced by the Dec
Lo time.
Range:
OFF
,
0 - 50
filter env/
noise amp
Clap mode w exp decay
reverb phase
decay time
ATK MODE
=
RATE
=
DECAY
=
0
time
filter env/
noise amp
Clap mode w gate decay
reverb phase
decay time
ATK MODE
=
RATE
=
DECAY
=
0
time
Type E
Type G
Type L
high velocity
low velocity
DECAY
=
DECAY LO
=
Dynamic decay
12
38
amp
0
time
25
50
