Chapter 3 refereNCe
| 19
M
Timb Env is not available if the A 1 (sine)
waveform is selected.
Timbre
The initial timbre is set with this parameter .
A value of 0 produces less harmonics, and
would allow the Timb Env amount, Timb Dec
and striking force to have a greater influence
on the Wave . A value of 50 will produce the
maximum harmonic content, leaving little to
be controlled by the Timb Env and Timb Dec
parameters .
The analog style waveforms are low pass
filtered, the other Waves will have their har-
monic content changed .
Timbre controls the FM amount if a FM Wave
is selected .
M
Timbre is not available if the A 1 (sine)
waveform are selected.
Range:
0 - 50
Timb Dec (Hi Decay)
Timb Decay is the time of the
timbre envelope decay .
M
If the Timb Env parameter is set to 0,
changing this parameter will have no
effect.
M
Timb Dec is not available if the A 1 (sine)
waveform is selected.
Range:
0 - 50
Punch
Punch can add a short, velocity controlled
attack portion to the Wave . L1 to L3 indicates
three different levels of this attack .
The “
PUP
” setting will shift the pitch of the
very first cycle or period in the Wave one
octave up, a great way to get a initial kick in a
bass drum sound . The “
Pdn
” setting will shift
the pitch of the first period one octave down .
Range:
OFF
,
L1
,
L2
,
L3
,
PUP
,
Pdn
Decay
The decay parameter sets
the length of the Tone and
the curve of the Tone decay . The higher the
value, the longer the sound .
Hold Shift and turn the Dial to quickly
choose between the exponential or the
linear curve.
Range:
1-50e
,
1-50L
max velocity
TIMB ENV
=
low velocity
TIMBRE
=
timbre
Timbre control
TIMB DEC
=
timbre decay time
0
time
25
50
