10 |
Nord drum user mANuAl os v1.x
ChApter 3 refereNCe
| 10
ChApter 3 refereNCe
| 11
The Panel
Master Level
The .Master .Level .controls .the .
overall .output .level .of .the .Nord .
Drum . .This .is .not .a .program-
mable .control .
Program/Store button
Press .the .Program .button .to .exit .any .other .mode .
and .to .enter .the .Program .mode . .The .LED .display .
will .show .a .P .followed .by .a .number . .There .are .99 .
programs .in .the .Nord .Drum . .
E
M
IfEaEprogramEhasE
beenEeditedEbutE
notEyetEstored,EthisE
willEbeEindicatedE
byEaEdotEinEtheE
lowerErightEcornerE
ofEtheELED.
Storing a program
Storing .a .Program .is .described .on .page .9 . . .
Program/Value LED display
Program mode
.is .indicated .with .a .P, .followed .by .
a .number .between .1 .and .99 . .
Edit mode
.is .when .a .
parameter .in .the .Nord .
Drum .is .selected . .The .
presentation .of .the .settings .will .be .made .with .
numbers .and/or .symbols . .Some .parameters .have .
dual .settings, .one .indicated .to .the .right .and .the .
other .to .the .left .in .the .display . .
When .you .want .to .change .one .of .the .red .
parameters, .hold .down .
the .parameter .button .
and .turn .the .dial . .
Solo Edit mode
.is .acti-
vated .by .holding .Shift .
and .pressing .the .Row .Select/Solo .Edit .button . .
The .Solo .Edit .LED .will .blink .and .only .the .compo-
nent .that .is .being .edited .will .be .heard .
System mode
.is .when .the .System .parameters .
are .selected .by .holding .Shift .and .pressing .a .
parameter .button .
Input Trig Level LEDs
The .Input .LEDs .will .flash .to .
indicate .the .activity .in .the .
four .channels . .A .solid .green .
LED .indicates .that .a .channel .
is .selected .for .editing .
The .upper .LEDs .are .red .and .will .flash .briefly .when .
a .trigger .input .receives .a .strong .signal . .It .will .be .lit .
up .in .a .longer .duration .when .the .input .receives .an .
optimal, .as-hard-as-you-can-strike .signal .
Channel Select button
Press .the .Channel .Select .button .
repeatedly .to .select .the .channel .to .
be .triggered .with .the .Trig .button .on .
the .panel .and/or .to .be .edited .with .
the .parameters .
E
YouEcanEuseEpadsEtoEquicklyEselectEtheEchan-
nelEtoEedit,EifEnoEchannelEhasEbeenEpreviouslyE
selectedEwithEtheEChannelESelectEbutton.EIfE
theEbuttonEhasEbeenEusedEtoEmanuallyEselectE
aEchannel,EpressEtheEProgramEbuttonEonceEtoE
getEbackEtoEtheEquick-select-edit-channel-by-
padsEmodeE(QSECBP™).
3
Reference