ChApter 1 stANd holder & CoNNeCtioNs
| 4
ChApter 1 stANd holder & CoNNeCtioNs
| 5
Trig Inputs CH 1 – CH 4
Connect .a .suitable .signal .source .to .the .Trig .
Input .¼” .jacks . .These .inputs .can .be .used .with .
a .variety .of .different .signals . .The .sensitivity .and .
the .threshold .of .the .inputs .can .be .adjusted .by .
using .the .Inp .Sens .and .Inp .Thres .parameters, .
read .more .about .this .in .the .following .chapter .
The .Nord .Drum .has .been .tested .with .many .
different .pads .during .the .development . .The .
Trig .Inputs .are .designed .to .be .very .versatile .
and .to .accept .many .different .kinds .of .signals . .
They .are .able .to .provide .you .with .a .very .fast .
and .dynamic .response . .
If .you .experience .double .triggered .sounds, .
flams .or .a .slow .response .from .the .Nord .Drum, .
make .sure .that .you .adjust .the .Trig .Type, .Inp .
Thres .and .Inp .Sens .parameters . .Read .more .
on .how .to .adjust .these .settings .this .on .page .6 .
and .page .14 .
Power
Connect .the .Nord .Drum .power .supply .to .the .
Power .input . .If .the .original .supply .is .not .avail-
able, .use .only .a .12 .volt .DC, .250 .mA .adapter, .
with .a .barrel .type .plug .that .has .the .positive .
current .on .the .tip . .The .outer .diameter .of .the .
plug .is .5 .5 .millimeter .and .the .inner .diameter .is .
2 .1 .millimeter .
