12
Backlight – Charge
You can set the brightness level on the display while the LPS II is charging here.
Press "OK" to go to menu - Select "General" - Select "Display" - Select "Backlight - Charge"
Use the arrows in the Backlight - Charge window to change the timer or switch the backlight on/
off. Press "OK" to activate the selected option.
Display – Discharge
You can set the brightness level on the display while the LPS II is discharging here.
Press "OK" to go to menu - Select "General" - Select "Display" - Select " Display - Discharge"
Use the arrows in the Backlight - Discharge window to change the timer or switch the backlight on/
off. Press "OK" to activate the selected option.
Parameter Protection
Press "OK" to go to menu - Select "General" - Select "Display" - Select "Parameter Protection"
Use the arrows in the "Parameter Protection" window to select the desired code. After each
number press "OK" to move to the next number.
Press "OK" to activate the selected option. Locked parameters will have a key icon.
Each time you want to change one of the locked parameters, enter the self-selected code. The
code for all parameters will be turned off for 60 seconds before the device requires it again.
To change/delete the code, go to "Parameter Protection" to reset the code. A new one can be
entered.
13
Contrast
The display’s contrast can be adjusted here.
Press "OK" to go to menu - Select "General" - Select "Display" - Select "Contrast"
Use the arrows in the "Contrast" window to change contrast from 30% - 100%. Press "OK" to
activate the selected option.
Sound
You can adjust the sound level for the LPS II here.
Press "OK" to go to menu - Select "General" - Select "Sound"
Power:
Off/On
Button:
Off/On
Error:
Off/On
Sounds for Power on and off, navigation buttons and error codes can be activated/deactivated.