background image

Repair or Warranty Contact 

Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084

WGX-0 

www.DustlessMadeSimple.com

 • 

Sales@JClayton.com

Page 14

Warranty Terms

Clayton Associates, Inc. guarantees its manufactured products against defects in materials or workmanship and will either repair or replace 

all parts that prove defective under normal use during the lifetime of the products. The warranty period shall commence from the date of paid 

invoice.
This warranty does not cover (a) repairs due to normal wear, accident, neglect, misuse, or use other than as indicated in the instruction booklet 

(b) products manufactured by third parties and distributed by Clayton (c) wear items such as bearings, rotor blades, regulators, valve stems, 

levers, shrouds, guards, O‑rings, seals, gaskets, motor brushes, and other wearable parts.

Repair within the Continental US

During the first 90 days of the warranty period, Clayton will provide parts and labor to the customer’s site at no charge or pay freight costs 

associated with returning the products for repair to a Clayton selected service location and repair the product at no charge. Clayton personnel 

will determine the best way to repair the product.
Past 90 days, Clayton will provide parts to the customer’s site at no charge or the customer may ship the product to a Clayton selected service 

location at customer’s expense and Clayton will repair the product at no charge and provide return shipping.

Repair Outside the Continental US

Clayton will provide parts to the customer’s site at no charge or the customer may ship the product to a Clayton selected service location at 

customer’s expense and Clayton will repair the product at no charge and provide return shipping.

Limitation of Liability

Clayton shall not in any event be liable for any damages, loss of production time or profits, whether based on contract, warranty, negligence, 

strict liability or otherwise, including without limitation any consequential, incidental or special damages, arising with respect to the equipment 

or its failure to operate.
Clayton Associates, Inc. makes no other warranty or representation of any kind, except that of title, and all other warranties, express or implied, 

including warranties of merchantability or fitness for any particular purpose, are hereby expressly disclaimed.

LIMITED LIFETIME WARRANTY TERMS AND CONDITIONS

Summary of Contents for Warthog WGX-115G-0



















Reviews: