18
Control Panel / Operation Instruction
1 Power Button
Pressing the Power button you turn the device on and off.
2 Timer
Pressing the Timer Button sets the timer. The timer function determines how many hours the
humidifier will operate. You can set the timer simply by pressing it once for each hour that you
would like to run the device. The timer can be set from 1 hour to 8 hours.
3 Speed/ Sleep mode
By pressing the Speed button, you can change the speed level. The 4 fan speeds offer
individual air flow (1-2-3 means the wind speed increases). Position 4 is the sleep mode.
When the sleep mode is activated, the display will turn off and the fan runs silently in the
lowest setting. Only the sleep mode light is on.
4 Turbo
Press the turbo button for a fast, highly efficient air purification in the highest level.
Press the turbo button again to return to the previous setting.
5 Filter
If the indicator light is on, the composite filter (HEPA and Activated Carbon Filter) must be
replaced. The composite filter has a lifespan of 400 hours.
2 Filter Reset
Reset the timer for the composite filter by pressing and holding the button Timer (for about 3
seconds). If the indicator light goes out, the timer has been successfully reset.
