background image

Installation and Operation Manual

 

Everest 

1

1-888-MY-AIR11        CAG-06-21-001        AtmosAir.com

01 

HOW IT WORKS 

Bi-Polar Ionization System

The

 Bi-Polar Ionization system

 is an air purification 

feature that releases a significant amount of positive and 

negative air ions.

Aluminum Pre-Filter

The

 Aluminum Pre-Filter 

is washable and reusable. It 

removes large dust granules, dander, pollen, floating 

contaminants and other pollutants.

Cold Catalyst Filter

The 

Cold Catalyst Filter 

creates a catalyst effect in normal 

living environments without any external assistance such as 
UV light, sunlight, high temperature, or pressure. The Cold 
Catalyst Filter reduces Ammonia, Benzene, Formaldehyde, 

Hydrogen Sulfide, TVOC and other harmful gases that are 

released by carpets, furniture, curtains, bedspreads, plywood 
and wallpapers. 

Honeycomb Activated Carbon Filter

The 

Honeycomb Activated Carbon Filter 

offers absorption 

of VOC's and other gases, contaminatnts, and in combination 

with all of the other technologies helps to make the product 
more efficient.

Antibacterial Filter

The 

Antibacterial Filter 

can target contaminants such 

as bacteria, spores, and other microorganisms and help 
to reuse them.

High-Efficiency HEPA Filter

The 

High-Efficiency HEPA Filter

 can capture down 

to .01 micron, with a filtration rate of 99% or more. That 

includes allergens, bacteria, dust, fungi, viruses and other 

small particles that cannot be captured by less efficient 
HEPA filters.

UV Sterilizer Light

The 

UV Sterilizer Light

 with the strength of 365nm  

UltraViolet light kills a variety of bacteria and other 
microorganisms. This UV germicidal lamp purifies the air and 
can eliminate odors caused by smoke and mold, and can help 
disinfect organisms like bacteria and viruses.

Summary of Contents for AtmosAir Everest
















Reviews: