5
Usage
Positioning
1.
Position the device on stable and even ground.
2.
For the air to flow correctly the device needs to be placed 30 cm from the walls and the furniture.
3.
Make sure that the front air outlet of the device is turned out towards the next wall or piece of
furniture. Make sure that the air outlets are not blocked.
4.
Plug in.
5.
Never place the device on unsecured ground.
Operation
1.
Make sure that the filters are at the right place and that all parts are well fixed to the device.
2.
Use the ON/OFF button (
POWER
) on the top of the device to switch it on. The button lightens up.
Use the
O•ION
button to determine the level of purification. The „LOW“, „MED“, and „HI“ LEDs
lighten up and show which level you have chosen.
LOW
The air purifier produces negative oxygen ions for 15 seconds and pauses for 105 seconds.
MED
The air purifier produces negative oxygen ions for 60 seconds and pauses for the next 60
seconds.
HI
The air purifier produces continuously negative oxygen ions.
Choose the right setting depending on the size of the room and the degree of air pollution.
3.
Press in the
TIMER
button to set the time for 1, 2, 3, 4, 5, 6 or 7 hours. The LEDs on the right
side of the button show the chosen time.
4.
Press on the
UV
button to switch the UV lamp on or off.
Certified technology
The UV sterilization technology has been accepted for more than 50 years as
a remedy. It is a secure alternative to reduce the number of bacteria and pollutants in the air.
Long working life
This extremely effective UV lamp only needs to be replaced after around 8‘000
working hours. The lamp functions for around 12 months if you use it constantly (24 hours a day).
The lamp can easily be replaced.
5.
Press on the
FAN
button (for extra strong purification) to switch the fan on or off.
Summary of Contents for Optima CA-401
Page 11: ...11 ...
