background image

CHarGInG YoUr toYs

Your GO Play unit must be plugged in to fully charge it for the system to be able to charge your toys. Plug 

in GO Play for the first time to check that the system is fully charged. The LED indicator will show whether 

your system is fully charged or needs charging.  When the system is plugged in the LED indicator will flash 

red fast. When it is fully charged the LED indicator will show solid red. A low charge will be indicated by a 

red flash. A completely dead battery will show no color (will show a fast red flash 3 times and then go dark). 

if fully charged place your toys inside and plug in to the USB. Your toys will stay charged based on the 

capacity of the toy’s batteries. follow the charging instructions provided by the toy manufacturer.

Your 

HoMe play

 unit will only charge toys when it is plugged in to the wall.

Charging from the Go unit using 

lithium ion battery:
1. 

Flashing red Fast: 

charging

2. 

solid red: 

charged

3.  

red Flash 3x, then Dark 

Completely:

 dead battery

4.  

Flashing red slowly:

 low charge

Diseñado para acomodar un juguete de tamaño mediano 

o unos pocos juguetes pequeños y compactos. incluye un 

batería recargable para viaje cómodo.  incluye un puerto 

de carga USB.  Debe ser cargado para activar el sistema de 

cargar y limpiar.  

Enciende y apaga automáticamente   

12.5" x 5" x 3.5"

Diseñado para acomodar juguetes grandes como el 

Magic Wand®.  Tiene múltiples divisores para mantener 

juguetes separados.  Puede contener hasta tres juguetes 

de tamaño estándar o una variedad de los compactos.  

incluye tres puertos de carga USB.  Debe ser conectado a 

toma de corriente para cargar y limpiar juguetes.

Enciende y apaga automáticamente   

16.6" x 8.5" x 5"

Summary of Contents for UVEE











Reviews: