BLX-100W Manual Page 6 of 9
Updated: 02/11/21
USER MANUAL: BLX-100W
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
General Use
Prior to use - ensure brushes and foot plate are
secured, the system itself properly installed, and that
water is both turned on and flowing to the unit's
spray bars. To verify water/sanitizer supply; step on
the Foot Plate to initiate water/sanitizer flow. Before
operating the unit, ensure solid footing and
use both
hands on the handrail for support.
1.
To begin operation, step up onto the Foot Plate
and grip the support handrail.
2. Place one boot in the unit.
3.
Push the boot back and forth multiple times so
every part makes contact with the brushes.
4.
Once the first boot is clean, remove it and repeat
the process with the second boot.
5.
If boots are extremely dirty, it may be necessary to
scrub them multiple times.
Cleaning and Wash-Down
1.
Shut off water supply to unit and depressurize
water lines.
1. Remove the Foot Plate and brushes from the unit.
2. Brushes and Foot Plate can be washed,
individually, in a COP tank or wash machine
3.
The frame can be washed down by conventional
means.
Operation
The following maintenance procedures are
recommended for normal use. Units which see a
high amount of daily use should be inspected more
frequently as necessary.
Weekly:
•
Inspect brushes for damage or wear.
• Check for missing or deformed bristles.
•
Inspect plumbing/water lines for damage
•
Ensure solid mounting to floor.
Monthly:
•
Check all fasteners to ensure they are tight.
• Ensure warning labels and decals are present
and in good condition.
•
Inspect valve for damage
Quarterly:
•
Inspect structure for cracked welds or bent
components.
Maintenance
