BLX-200W Manual Page 2 of 9
Updated: 02/11/21
USER MANUAL: BLX-200W
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
The BLX-200W is an all manual, single footwear
scrubbing unit. Designed and built as a solid member,
open stainless steel frame with a solid hand rail for
support. The BLX-200W features one removable sole
brush and four removable vertical side brushes, each
of which require no tools. Being a manual based, wet
unit the BLX-200W requires no electrical and is pre-
configured for easy plumbing of water and sanitizer.
Overview
▪
Frame - 304 Stainless Steel
▪
Length - 29
1
/
2
in.
▪
Width - 28 in.
▪
Height - 42 in.
Specifications
!
CAUTION:
1. Avoid contact of cleaning agent with skin
and eyes. If contact occurs, see MSDS sheet
for further first aid measures.
2.
Follow safety instructions of chemical
manufacturer (MSDS).
3.
Always follow plant and OSHA guidelines
about the use of hygiene equipment.
4. All personnel using this unit must be
familiar with the information contained
in this manual. Follow all installation and
maintenance instructions.
5.
Always wear appropriate footwear. Secure
or remove loose items on footwear.
6.
Ensure solid footing and use both hands
when operating the unit.
▪
Cold Portable Water
▪ 35 PSI Minimum Pressure
▪
100°F Max Temperature
Water Requirements
NOTE:
A back flow preventer must be installed
in the water line for this unit. Check local
codes to ensure proper installation
!
WARNING:
DO NOT use flammable liquids (i.e. alcohol
based solutions or similar) without dilution.
