Button at top left with “few bubbles” symbol:
For everyday use with good quality
tap water. Use this button when you have completed your 3 weeks of getting used
to the vortexed water.
Middle button with “many bubbles” symbol:
By using this program the water will
become more highly energized. For low quality, bad tasting or heavily chlorinated
water. Run the program twice, wait for the vortex to end and settle, before pressing
the button the second time. The propeller runs for about 7-8 minutes. In case of any
discomfort go back to the top left “few bubbles” button.
Top right button with “tuning fork” symbol:
Programmed to get you started using
the LWV. See under “Get started – daily use” how to use this button.
Can be adjusted to suit personal needs – contact your dealer.
CONGRATULATIONS ON YOUR NEW LIVING WATER VORTEXér!
Please read these instructions thoroughly before you start using your
LIVING WATER VORTEXér (LWV).
IN THE BOX
Jug with lid, main charger and USB cable for charging and programming. Both jug and lid
are made of ECO-friendly food-grade plastic, suitable for drinking water, see under “Technical
Information”.
GETTING STARTED
New users must read these instructions carefully to familiarize themselves with the functions
and different programs before using LIVING WATER VORTEXér.
POSITIONING AND CHARGING
The LWV should be placed on a stable base during use.
Always fill the jug exactly to the mark (shown by arrow) for the LWV to work correctly.
If the internal light blinks when pushing any button and it does not start, it is time to recharge
the lid using the USB stick. One charge will provide about 50 vortexes using the everyday
program (top left button).
Use the charger supplied with the system: 5.5V / 1A or any 5V USB charger of 1A - 2.5A.
CARE AND CLEANING
Before use, clean the jug and lid with moistened kitchen paper or tissue. Remove any lime
scale residue with lemon or vinegar. Do not use other types of cleaners or lubricants. Do not
immerse the lid in liquid or put in dishwasher – the electrical parts will be damaged!
The silver coating on the propeller has an antiseptic effect. Remember to polish it using a soft
cloth if it becomes tarnished to maintain the antiseptic effect.
Once or twice a week you may want to place the lid on a lukewarm radiator over night. This
will remove any condensation which occurs as a result of temperature changes. Place it with
the propeller facing down.
IMPORTANT - ALWAYS REMOVE THE LID WHEN
:
1. FILLING IT WITH WATER.
2. PUTTING THE JUG IN A REFRIGERATOR.
WARRANTY, SERVICING & REPAIR
There is a 30 day return policy on the LWV. If returned the LWV must be completely dry and
in the original packaging. The seller will pay for return shipping, provided you request a return
label, which will be sent by mail.
The LWV is covered by a 2-year warranty on materials and construction. The LWV may
only be used for vortexing of water. Normal wear and tear and damage due to misuse or
inadequate care and cleaning are not covered by the warranty. It is the user’s responsibility
to check cables are intact and to inspect the parts for possible damage and wear. Repairs
must be performed by authorized technical personnel only. The LWV may not be serviced or
repaired by the user. In the event of malfunction, please return the device to your LWV dealer
for repair. Remember to include the invoice number or copy of the receipt.
THE FUNCTION BUTTONS ON THE LID
START UP AND DAILY USE
Many of our cell types are renewed within 21 days and it takes roughly this long to get used
to the energetic quality of vortexed water, so we have calculated an acclimation period of
approximately 6 weeks*.
During your start up phase use only the “tuning fork” button (for getting attuned).
START UP PROGRAM:
Week 1:
Fill jug and push the “tuning fork” button once. Start with ½-1 glass of water on the first day.
On day 2, if you do not feel any discomfort, drink 1-2 glasses. Continue this for a week.
Week 2 and 3:
A single push of the “tuning fork” button. Drink up to about 1 litre per 40 kilo body weight, as
long as you do not feel any discomfort.
After 3 - 6 weeks without any discomfort, you are now ready to use a single push of
the “few bubbles” setting. If you feel any discomfort – drink less.
When the body gets used to the altered energy and quality of the vortexed water,
you may want to use the “many bubbles” program to increase the energy in the water.
But if this seems too strong, go back to the previous setting.
Only run the “many bubbles” setting twice if you have very low quality water.
*VERY SENSITIVE?
Pay careful attention to the reactions of your body and slow down the process
further if needed. It is VERY IMPORTANT that you listen to your body – we all have
different needs. If you have any sense of discomfort, go back to the previous program
or drink smaller or fewer glasses a day. Remember, the water is completely safe – in
conventional scientific terms, the vortexing process does nothing but add energy.
