cleanAIR CHEMICAL 3F Plus, User Manual

6

7

  process is indicated by the red LED.

4.  Having  the  battery  charged  first  of  all  disconnect 

  the battery and then disconnect the charger from  

  the mains.  

5.  The battery has to be charged in temperatures 

  between 0 – 45°C

Do not leave the battery charger connected to the 

mains when not used.
6.2.2.  Battery replacement
CA Chemical 3F

see Picture appendix no.4

Picture 4A : 

Taking the replaceable battery off the powered respi

-

ratory unit : grasp the unit from the front  so that you 

rest your index fingers  against the safety locks of the 

battery to release them. Push your thumbs into the rims 

at the back of the sides of the battery. Then by pulling 

both thumbs away from the unit you will release the 

battery and push it off the guide ways.

Picture 4B : 

Pushing the battery onto the powered respiratory unit: 

push the battery into the guide ways on the bottom side 

of the unit. 

Push the battery towards the unit  until both safety locks 

click into the right position and safely lock the battery.

6.2.3.  Spare parts and accessories

The manual for assembling spare parts and acces-so-

ries is presented in the Picture appendix in the chapter 

called Accessories.

7.  Possible faults 

In case of any fault, a sudden decrease or increase  of 

air supply when the user is in a contaminated working 

area, it is vital to leave the place and to check the fo

-

llowing:
•  Whether the unit is correctly assembled. 

•  Battery charging.

•  The function of the battery charger.

•  Filter clogging.

•  Whether the air hose is not damaged. It is necessary 

to make sure that the air hose does not get caught 

on protruding objects and that there will not originate 

a rupture during work.

•  Whether the sealing of the safety hood is all right.

•  In case of working time reduction at one charging it 

is necessary to replace the battery.

8. Storage

All parts of the CleanAIR

®

 system must be stored at

temperatures between -10°C and 55°C with  relative air 

humidity inbetween 20 and 95 % Rh. Maximum storage 

life in undamaged wrapping is 2 years excluding batte-

ries! During storage self-discharge of batteries occurs. 

Batteries stored  for long terms must be fully charged 

every 6 months.

9. Warranty

The Quality Warranty ensures you will receive a repla-

cement if a product presents any manufacturing or 

material defects within  12 months from the date of 

purchase. For batteries it is 6 months from the date of 

purchase. The warranty claim must be lodged at sales 

organization. At the same time the proof of purchase 

must be handed in ( invoice or certificate of delivery).

Fault

Probable cause

Recommendation

The unit does not work at all

Battery discharge
(check : the unit starts working 

after replacing the battery with 

another functional battery)

Fault of motor, electronics or 

charging connector

Recharge the battery.

(if the problem outlasts, check the 

battery)
Return to the producer for repairing.

The unit does not supply satisfactory 

amount of air.(low air-flow)

Blocked air-hose or air channel. 

Air leakage. 

The battery is not charged 

enough. 

Clogged filter.

Check and remove the possible block. 

Check all sealing elements and joints, make 

sure the hose is not damaged and without 

leakage. 

Charge the battery. 

(if the problem outlasts, check the battery)

Replace the filter.

The unit works only for a short time.

Clogged filter.

The battery is not charged 

enough .

Replace the filter.

Charge the battery. 

(if the problem outlasts, check the battery)

It is impossible to charge the battery..

Fault of charger. 

Bad battery connector .

Contact your supplier. 

Check the battery contact.

It  is impossible to charge the battery 

sufficiently.

Termination of battery life time.

Install a new charged battery.

The warranty can be acknowledged only if no inter-

-ventions into the powered respiratory unit and char-

-ger have been made. The warranty does not cover 

defects caused by the late replacement of the filter or 

by using a filter which was damaged by  cleaning or  by 

filter blow-through.

CA CHEMICAL 3F

3F Plus

Minimum air-flow

Display

Weight of filter unit excluding  filters

Filter unit noise

Battery life time

One recharging cycle

Belt size

Advised temperature range for work

Advised air humidity range for work

Certification

120 a 235 l/min –  hood regime, in 5 eligible rates

TFT display

1 420 g

55 to 61 dB

500 to 700 recharging cycles

3 - 4 hours

75 to 130 cm at waistline

0°to 60°C

20 to 95 % Rh

EN 12 941/A2 TH2,TH3 ; EN 12 942/A2 TM3

Estimated operating time 

(hours)

Air-flow 

(l/min)

Filter type

Particle

P R SL

A2 P R SL

Combined

ABEK2P R SL

Combined ABE1 

P R SL

CA Chemical 3F plus

160

10

9,5

9,5

9,5

210

8,5

6,5

6,25

6,5

Declaration of Conformity is available at: https://www.clean-air.cz/doc

Notified body for testing CE:  

Occupations Safety Research Institute, v.v.i.

Jeruzalémská 1283/9, 110 00 Prague 1

Notified body 1024

11.    List of parts:

CA CHEMICAL 3F

Order code:

Description:

51 00 41

Decontaminable belt

51 00 42

Decontaminable harness

51 00 30EUR

Battery charger

51 00 30UK

Battery charger UK plug

52 00 10

Battery Li-Ion 14,4 V / 2,6 Ah

52 00 43.1

Comfort padded belt 3F

52 00 44.1

Comfort padded harness

52 00 46

Set of decontamination plugs - 3F

71 00 60

Light flexi hose QuickLOCK™ - CA40x1/7“

71 00 86

Rubber hose QuickLOCK™ – CA40×1/7“