cleanAIR MedicAER User Manual Download

Page: 5 / 66

8. Basic description of unit control and settings

Switching on

After turning the unit on, you

will see information about the

manufacturer of the unit on

your display.

Main screen information

The next screen shows

current airfl ow, fi lter clog-

ging and battery level. You

can also see the current

headtop and fi lter setting.

Airﬂ ow adjustment

You can adjust airfl ow by

simple pressing the or

button on the side of the unit.

The available airfl ow setting

depends on the headtop and

fi lter setting.

Rotating display

By briefl y pressing down on

both buttons you can rotate

the display clockwise by 90

degrees.

How to get to the main menu

Press the and button at the same

time and hold them for 2 seconds. The

main menu will appear.

How to navigate in the menu and

change settings:

• Press the button and jump to the

next menu item, or hold the button

for 2 sec to jump to the previous item.

• Press the button and change the

settings of the item.

• Press both buttons for 2 seconds to

save the settings and leave the menu

(not pressing anything for 5 sec does

the same).

Unit headtop setting:

Go to the unit menu ( and for 2 sec)

and repeat pressing until the required

headtop standard appears.

How to change the fi lter setting:

Go to the unit menu ( and for 2 sec) and press

once to get to the next item; repeat pressing

until the required fi lter standard appears.

Available

languages

• English

• French

• German

• Czech

• Norwegian

• Dutch

• Italian

• Spanish

• Russian

• Hebrew

• Polish

How to change the language

To change the language, go to

the menu ( and at the same

time for 2 seconds) and then to

the language item* (press the

button four times); press the

button to select the required

language. By not pressing any-

thing for 6 seconds your set-

tings will be confi rmed.

* In order to ease fi nding “lan-

guage item” is highlighted by

symbols “>“ and “<“.

9. Storage

All parts of the CleanAIR® system must be stored at temperatures between -10 °C and 55 °C, with relative air humidity be-

tween 20 and 95% Rh.

Batteries will self-discharge during storage. Therefore, it is recommended to charge the battery for 1 hour at least every 3

months. The optimal battery charge level for longer storage is between 50 - 70% of capacity. After longer storage time it is

necessary to repeat 3 charging cycles to reach battery’s full capacity.

10. Warranty

The warranty ensures that you will receive a replacement if a product has any manufacturing or material defects that appear

within 12 months of the date of purchase. The same period for batteries is 6 months from the date of purchase. The warran-

ty claim must be reported to the sales department/retailer. At the same time, proof of purchase must be submitted (i.e. an
invoice or certifi cate of delivery). The warranty can only be acknowledged if no interventions into

the powered respiratory

unit and charger have been made. The warranty does not cover defects caused by the late replacement of fi lters, or

by using a fi lter which was damaged by cleaning or being blown through.

The manufacturer strongly recommends to perform periodical inspections in CleanAIR® authorized service center.

Inspections should be done according the local law and at least once in every two years.

11.

Technical data

Technical specifi cations - CleanAIR® MedicAER®

Airfl ow

120 - 235 l/min

Display

TFT display

Weight of unit, including battery

960 g

Unit noise

55 to 61 dB

Battery lifespan

Max. 500 recharging cycles

One charging cycle

less than 3 hours

Belt - waist size

up to 1,500 mm

Operating temperature

0 to 60 °C

Operating humidity

20 to 95% Rh

Certifi cation

EN 12941/A2 TH2/TH3; EN 12942/A2 TM2/TM3

The unit conforms with IP65 - IP68 (Ingress Protection against liquids and solid particles):
• IP64: When the unit is powered on (no additional requirements)

• IP65: When the unit is on (attached spark arrestor and pre-fi lter holder set - 50 01 12)

• IP68: When unit is off (with inlets and outlets closed by decontamination plugs - 51 00 46)

Notifi ed body for testing CE:

Occupations Safety Research Institute

Jeruzalémská 1283/9, 110 00 Praha 1

Autorizovaná

osoba

235

Notifi

body

1024

Declaration of Conformity is available at: