Installer's Manual: Clean Burn Air Compressors
3-7
Preparing the Furnace Cabinet (Furnace Models CB-1750/2500/3250)
1.
Refer to Figures 3A and 3C.
2.
Install all-thread rods in the mounting lugs on top of the furnace cabinet. Use double nuts to
securely lock the all-thread rods in position.
Mounting the Air Compressor (Furnace Models CB-1750/2500/3250)
CAUTION:
The compressor must be securely mounted as described in this section. Ensure that
all nuts and bolts are firmly tightened.
1.
Refer to Figure 3A and 3C.
2.
While facing the burner side of the furnace, install the air compressor on the front right all-thread rod
using the two U-bolts and nuts provided. Position the mounting bracket approximately two inches
above the top of the furnace cabinet.
Summary of Contents for 14336
