CleanCraft 7002155, Operating Instructions Manual

10

dryCAT - Series | Version 2.04

Operation

7.1 Assembly of the vacuum cleaner

- Remove the package of the vacuum cleaner and 

make sure that the vacuum cleaner has not any 
sign of damage  

- If the paper / cloth filter is intended to be used, in-

sert it into the container by pulling it onto the plate 
(Fig. 5).

Fig. 5: Assembly of the filter  

- Place the motor head on the container and secure 

with the clamps on the left and right. (Fig. 6).

Fig. 6: Assembly of the engine head 

- Connect the suction hose to the suction opening of 

the dry vacuum cleaner. Connect the other end of 
the suction hose to an extension or suitable nozzle 
(Fig. 7).

Fig. 7: Mounting hose

7.2 Start and stop

Start

- Plug the power plug into a suitable power outlet.

- Press the on / off button.

Fig. 8: ON/OFF Switch  

Stop

- Switch off the appliance, press the on / off button 

and disconnect the mains plug.

- When pulling out the plug always pull on the plug, 

never on the cable.

7.3 Seal control

Over time, the quality of the seal may deteriorate as a re-
sult of aging or damage to the seals. This leads to a de-
crease in the suction power. We recommend periodically 
checking the locking hooks, flexible suction hoses and 
seals for perfect function.

Clean all seals after completing work. Dirt can prevent 
proper functioning and cause damage. 

Also check that the edges of the container are not dama-
ged.

WARNING!

Check that the vacuum cleaner has no impact marks 
or damage and make sure all safety equipment is in 
place and functioning.

NOTE!

The dryCAT 262 ICT H-Class has 2 separate ON/OFF 
switches. This makes it possible to choose for yourself 
how many motors should work. This allows a significant 
saving of energy.