Operation
dryCAT - Series | Version 2.04
9
6.1 Scope of delivery
The Dry Vacuum Cleaner is delivered with:
Fig. 4: Scope of delivery
- Suction hose 4m
- Handle with Faulty air regulation
- Suction tube pluggable
- Floor nozzle
- Round nozzle with brush
- Flat die
- Reduction
- Cartridges filter
- H-class filter bag
6.2 Accessories
- Carpet brush
Item number: 7010000
- Holder for suction tube
Item number: 7010001
- Powered carpet brush
Item number: 7010320
- Carpet and floor cleaning nozzle
Item number: 7010323
- Dry Suction Set
Item number: 7010324
- Filter bag H-class
Item number: 7010330
- Connector for suction hose Ø 38 mm
Item number: 7010450
- Upholstery cleaning nozzle
Item number: 7013033
- Suction tube Ø 38 / 500 mm, aluminum/plastic
Item number: 7013045
- Adapter for pipe Ø38
Item number: 7013046
- Handle with false air regulation
Item number: 7013048
- Hose Ø 29 mm / 5 m with connection for Power tool
Item number: 7013055
- HEPA H14-Cartridge filter
Item number
: 7010335
- Detergent alkaline SPX 1l
Item number: 7321001
- Detergent alkaline SPX 5l
Item number: 7321005
- Detergent alkaline SPX 10l
Item number: 7321010
7
Operation
WARNING!
Before putting the device into operation, make sure
that the voltage stated on the rating plate corre-
sponds to the mains voltage.
DANGER!
Risk of death by electrocution!
There is danger to life when in contact with live com-
ponents. Switched on electrical components can
cause uncontrolled movements and lead to serious
injuries.
- Disconnect the power plug before starting any adju-
stments to the dry vacuum
ATTENTION!
The device must be correctly installed before use. It
must also be checked that the filter elements are
mounted correctly and that their proper function is
guaranteed.
The device should only be operated, mounted, repai-
red and transported on a stable, flat surface.
ATTENTION!
Always disconnect the mains plug from the socket
before handling the switched-off device.
Always check the power cord for damage such as
cracks or signs of aging. A damaged cable must be
replaced before further use of the dry vacuum cle-
aner. The replacement of a defective power cord
must be carried out by the technical service or by
qualified personnel.
When using an extension cable, make sure that it
has the same cable dimension as the power cable of
the device and avoid contact of the cables with
liquids or conductive surfaces.
Summary of Contents for 7002155
Page 20: ...www cleancraft de ...
