Integrated Switching Power Supply
5
4. System Operations
4.1 Front Panel Buttons
l
Switch on/off output channels:
Press
01~12
buttons on front panel to switch on/off the corresponding output channel.
l
Select the output voltage:
Press
SELECT
button on corresponding output channel to select the output voltage as
5V, 12V or 24V.
After switching the output voltage, the output channel will be turned off based on
overvoltage protection control, and it needs to be turned on via the corresponding
output channel switching button on front panel.
4.2 RS232 Control
Connect a PC to the RS232 port on the rear panel, and then install the RS232 control
software on the PC, the product can be controlled by sending RS232 commands via
the RS232 control software.
4.2.1 Installation/uninstallation of RS232 Control Software
l
Installation
Copy the control software file to the computer connected with the
product.
l
Uninstallation
Delete all the control software files in corresponding file path.
4.2.2 Basic Settings
Double-click the software icon to run this software.
Here we take the software
CommWatch.exe
as example. The icon is showed as
below:
The interface of the control software is showed as below: