Copyright ©2006 by Cleanfix Cleaning Systems, Inc., 465 West Main St., Wyckoff, NJ 07481.
All rights reserved. Content is subject to change.
3
GENERAL PRECAUTIONS (continued)
•
Do not handle the plug of the Air Mover with
wet hands.
•
Store Air Mover indoors in a dry area.
•
Do not put any objects into openings. Do not
use with any opening blocked; keep free of
anything that may reduce air flow.
•
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
•
Turn
OFF all the controls before unplugging.
•
Do not use where anesthetics or oxygen is
used. Do not operate the machine where
explosive vapors or flammable materials exist.
•
Do not use an extension cord unless
absolutely necessary. If an extension cord is
used, then wire size must be 14 ga. or larger
and should not exceed 50 feet in length. The
extension cord must be three-wire type to
insure grounding protection.
•
Replace damaged or worn parts immediately
with genuine original equipment parts to
maintain safety and to protect your limited
warranty.
GROUNDING INSTRUCTIONS - 120 VOLT
Improper use of the grounding plug can result in a risk of electric shock.
Electrical equipment must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electrical current to reduce the risk of electric shock.
The blower is equipped with a cord having equipment grounding conductor and grounding plug.
The plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
If repair or replacement is necessary, DO NOT connect the grounded wire to either flat blade
terminal. The wire with insulation having an outer surface that is green with or without yellow
stripes is the grounding wire.
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as
to whether the outlet is properly grounded.
Do not modify the plug provided with the equipment. If it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
Note: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
DO NOT Place in
standing water.
WARNING
WARNING
