RA-300 Manual - Part No 258407 - Printed in USA 01-27-10
P
AGE
8
T
ROUBLE
S
HOOTING
G
UIDE
PROBLEM:
Scrubber does not run, no power.
Possible Cause
Possible Solution
1)
Fuses or circuit breakers have tripped.
1)
Check and replace fuses or reset
circuit breakers.
PROBLEM:
Insufficient vacuuming power.
Possible Cause
Possible Cause
1)
Debris caught under squeegee blades.
1)
Remove debris and wipe blades with
clean cloth.
2)
Vacuum hose not connected.
2)
Connect hose.
3)
Tank cover not properly seated or gasket
3)
Reseat tank cover correctly or replace
on the dome cover is damaged.
gasket.
4)
Filter in tank cover blocked.
4)
Clean filter with water.
5)
Recovery tank drain plug not properly placed.
5)
Check drain plug and replace properly.
PROBLEM:
Squeegee not picking up water.
Possible Cause
Possible Cause
1)
Rubber blades on squeegee dirty or worn-out.
1)
Clean or replace blades.
2)
Squeegee not in contact with floor.
2)
Check blades and replace if necessary.
3)
Recovery tank full.
3)
Empty recovery tank.
4)
Vacuum hose loose or hose is damaged.
4)
Reinstall or replace hose.
PROBLEM:
Little or no water flow going to brushes.
Possible Cause
Possible Cause
1)
Solution line blocked.
1)
Flush out solution tank and lines
with clean water.
2)
Solution tank filter clogged.
2)
Unclog filter.
3)
Solution tank empty.
3)
Refill solution tank.
Before working on the scrubber disconnect power cord.
Service and repairs, should only be performed by an
authorized service center.
C
AUTION
:
W
ARNING
:
777 South Street P.O. Box 3210, Newburgh, NY 12550-0606
TEL:
(800) 835-7812 (845) 565-8850
FAX:
(845) 565-9392
www.mastercraftusa.com - techsupport@mastercraftusa.com