SPRacingF4EVO
http://seriouslypro.com - http://cleanflight.com
Page 8
Getting started
Verify flight controller operation via the configuration software.
•
Disconnect the flight controller from your computer.
•
Disconnect ALL connectors and headers from the flight controller.
•
Install latest STM32 Virtual COM Port Driver
http://www.st.com/web/en/catalog/tools/PF257938
•
Install and launch the Cleanflight Configurator tool
https://chrome.google.com/webstore/detail/cleanflight-configurator/enacoimjcgeinfnnnpajinjgmkahmfgb
•
Connect flight controller to computer via USB cable.
•
Select the correct COM port if it is not automatically detected.
•
Click connect, verify that communication is established. (Fig 3)
[Figure 3 - Setup tab after connection established]
•
Verify all sensors on your board are giving correct readings. (Fig 4)
