AUTO DUMP PUMP
AUTO DUMP PUMP:
1. Fill solution tank with clean water.
2. Connect desired tool and extractor with vacuum hose and solution hose.
3. Remove auto dump pump connect cap and connect auto dump hose. See image 16.1. (available longer optional
dump hose)
4. Make sure manual drain valve/hose is closed/connected.
6. Turn pump, vacuum, and optional auto dump switchs to “ON”.
7. Start and continue cleaning until the clean water tank is empty and/or cleaning job is done.
8. Turn off all the switches and disconnect electric power cord from power plug, then empty the left over recovery
tank into a bucket or another proper drain area.
14
OPTIONS
IMAGES AND ILLUSTRATIONS ARE FOR REFERENCE ONLY. ACTUAL PRODUCTS MAY NOT BE EXACTLY AS SHOWN.
vacuum hose connect
switch plate
auto dump pump switch
auto dump
connect cap on
quick connect for
solution hose
upper drain
hose connect
drain hose
OPTIONAL AUTO
DUMP AND FILTER
auto dump pump filter
over ball float cage
auto dump pump located
inside the recovery tank
image 16.1
image 16.2
Summary of Contents for CF-100 Series
Page 2: ......