background image

GROUNDING INSTRUCTIONS:

This piece of equipment must be grounded. Should an 

electrical malfunction occur, grounding provides a path 

of least resistance for electrical current- reducing the risk 

of electric shock. This piece of equipment is furnished 

with a cord that has a grounding conductor and ground-

ing plug. The grounded plug must only be plugged 

into an appropriate outlet that is properly installed and 

grounded in accordance with all local codes and ordi-

nances.

Connecting the equipment to an improperly grounded 

outlet can result in an increased risk of electric shock. A 

qualified electrician should be consulted if you are un-

sure that the outlet is properly grounded. Do not modify 

the plug provided with the equipment. If it will not fit 

the outlet, have a proper outlet installed by a qualified 

electrician.

This appliance is designed for use on a 120-volt circuit. 

The grounding plug provided looks like the plug illus-

trated in Figure 1. Replace the power cord if the ground-

ing pin is damaged or broken.

 

DAILY MAINTENANCE: 

The TPL-PH12 is engineered and built to require mini-

mum maintenance. But like any machine, it does require 

some care to keep it in optimum working condition. 

Careful attention to these maintenance instructions 

will give you maximum operating performance and life 

expectancy of the machine. 

CAUTION: Disconnect the power cord from the out-

let before doing any clean up or maintenance on the 

machine

1.  Keep the machine clean, inside and out including 

brush and brush chamber.

2.  Pour a gallon of clean hot water into your extractor. 

Tum the pump on and flush the entire system 

through the spray nozzles for about a minute to pre-

vent alkaline build-up.

3.  Quick connect coupler- Spray with silicone lubricant 

to keep coupler from sticking.

4.  If the plunger on the valve sticks, disassemble and 

spray with silicone lubricant.

Servicing:

In the event that your heater requires service, please 

contact CLEANFREAK at:

 800.826.4405   

or email customerservice@cleanfreak.com

Do not attempt major repairs yourself. CLEANFREAK 

will assist you in locating an indepedent service contrac-

tor. 

 

Fig. 1

3

Reviews: