background image

1

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THIS INSTRUCTION MANUAL.
1. This Appliance is not intended to be used by children under or anyone lacking knowledge on proper use.

Supervision may be necessary. Do not allow children to play with theAppliance.

2. Do not use the Appliance in extremely hot or cold vironmts (below 0

˚

C/32

˚

F or above40

˚

C/104

˚

F). The Appliance

can be used to clean outside windows if it is properly tethered to the Safety Pod, winds are calm, and it is not
raining or snowing.

3. Please sure the Appliance is plugged in while it is cleaning. The Appliance has a Back-Up Battery that charges
during use. The Back-Up Battery powers the Appliance if it becomes unplugged or the electricity fails.
4. Do not leave the Appliance unattended when it is plugged in.
5. For household use ONLY. Do not use the Appliance in commercial or industrial vironmts.
6. Do not use the Appliance on cracked glass.
7. Only use accessories recommended or supplied by the manufacturer. Only use the Power Adapter supplied

by the manufacturer. Please make sure your power supply voltage matches the power voltage marked on the
Power Adapter.

8. Do not use the Appliance on a framed window with a frame smaller than 5mm (0.2 inches).
9. Do not use the Appliance on wet or greasy windows.
10. Store the Appliance away from heat and flammable materials.
11. Do not use the Appliance if it does not firmly attach to the glass or has visible signs of damage.
12. To reduce the risk of electrical shock, do not put the Appliance in water or other liquid. Do not place or store

Appliance where it can fall or be pulled into a tub or sink.

13. Do not touch power plug or the Appliance with wet hands.
14. Do not charge the Appliance in extremely hot or cold vironmts, or it may affect battery life span.
15. When charging the Appliance, do not place it on other electrical appliances and keep it away from fire and liquid.
16. Take care not to damage the power cord. Do not pull on or carry the Appliance by the power cord, use the power

cord as a handle, close a window on the power cord, or put heavy weights on the power cord. Keep power cord
away from hot surfaces.

17. Do not use with a damaged power cord or receptacle. Do not use the Appliance if it is not working properly, has

be dropped, damaged, or come in contact with water. It must be repaired by the manufacturer or its service agt
In order to avoid a hazard.

18. If the supply cord is damaged, it must be replaced by the manufacturer or its service agt in order to avoid a hazard.
19. The plug must be removed from the receptacle before cleaning or maintaining the Appliance. Do not unplug the

Power Adapter by pulling on the power cord.

20. The Back-Up Battery must be replaced by the manufacturer or its service agent in order to avoid a hazard.
21. The Back-Up Battery must be removed and discarded according to local laws and regulations before disposal of

the Appliance.

22. The Appliance must be disconnected from the receptacle before removing the battery for disposal of the

Appliance.

23. Please dispose of used batteries according to local laws and regulations.
24. Do not incinerate the Appliance ev if it is severely damaged. The battery can explode in a fire.
25. The Appliance must be used in accordance with the directions in this Instruction Manual. Product manufacturer

cannot be held liable or responsible for any damages or injuries caused by improper use.

1. Important Safety Instructions

Summary of Contents for CC901

















Reviews: