background image

4. SYSTEM OPERATING INSTRUCTIONS 

Your new system is now ready to be used. Here are a few simple guidelines to follow when you are 
using your Central Vacuum System: Insert the wall end of the hose into one of the vacuum valves 
installed throughout your home and you are ready to start. 

NOTE 

In regards to the low voltage system: All vacuum inlet valves are fitted with two spring loaded metal 
pins (see inside the valve opening). When the two metal parts of the hose wall end are in contact 
with the two pins inside the valve, the system is energized. You may now turn it on or off from the 
hose handle switch (if this option was selected). 
The low voltage cable is connected in parallel from every valve, it runs all along the pipe network and 
brings the power to the remote switch so to remotely start or stop the power unit in all safety. 
A standard flexible hose, not fitted with an interrupter, will start the power unit as soon as it is inserted 
in the valve opening. 
 

5. SYSTEM MAINTENANCE 

FILTRATION SYSTEM 

In order to maintain optimal air quality in your home, the power unit comes supplied with a high 
efficiency HYBRID filtering system. The washable and reusable permanent filter and a disposable 
filtration -bag. The permanent filter must be in place at all times, the filter securing strap must be 
tightened just so as to insure no fly-by of debris into the motor housing. 

 

IMPORTANT 

This unit can be used with or without disposable filtration -bag. The disposable bag installs as shown 
here : 
1- Remove the debris canister. 
2- Remove the dirt filled bag. 
3- Install the new bag by twisting it.  
4- Verify and clean (if necessary)the permanent filter. 
5- Replace the debris canister and secure the latches. 

 

NOTE 

When replacing the disposable bag, make sure that the rubber diaphragm is correctly installed onto 
the intake PVC pipe. Make sure that the bag is not cut or damaged. Make sure that the canister is 
secured in place prior to restarting the power unit. 

It is recommended to replace the disposable 

bag or to empty

 

the debris canister as well as to clean the permanent filter 3 or 4 times per 

year. 

If the system is used more frequently than normal, repeat the above procedure more often. 

Summary of Contents for NADAIR V600AL










Reviews: