7. LOW VOLTAGE SYSTEM TECHNOLOGY
LED status interpretation guide
This Central Vacuum Power Unit is provided with an LED status indicator to keep you informed on the
different states and functions during its operation. Reading the following table will allow you to identify
the status of your appliance by the different behaviours of the LED.
STATUS COLOUR LEGEND
OFF
The power cord is unplugged – No power.
GREEN
The power cord has just been plugged-in or the power has been
restored. The LED will flash rapidly for a few seconds and will then
become solid again
.
GREEN
The power unit is operational.
AMBER
Stop the power unit, replace the bag and clean the permanent filter if
required (after 15 hours of usage), reboot the unit by pressing the
small button for 5 seconds. The LED will return to
.
RED
The 500 hours motor inspection is now required, otherwise
the motor may get damaged.
RED
Stop the power unit and have service done on the unit
immediately at an authorized service center.
Slow blinking LED
Fast blinking LED
Solid – No blinking
8. SAFETY NOTES
-Make certain that the work area is safe and clear prior to installing your new Central Vacuum Power
Unit.
-Wear the necessary safety clothing & equipment prior to start any work i.e goggles, gloves etc.
-Use the right tools & in good working order:
- Hammer
- Phillips head screwdriver
- Measuring tape
- Level
- Drill; with wood or concrete bit of 10mm
- Pliers
- Wire stripper
For future references, take note of the following information:
Serial number:____________________________________________
Date of purchase: _________________________________________
Purchased at: _____________________________________________
Please keep a copy of your invoice together with this manual
