20 CV1450/1700/1950 Installation Guide
© Clear Vue Cyclones 2022
Assembling the Flangeless Filter Stack
(filtered systems only)
1. Stack the two filters together, one on top of the other.
2. Run a bead of silicone caulk around the outside of the seam where the two filters meet.
3. Secure the band clamp:
a. Place a ¼”-20 flat washer on the ¼”-20 x 1”
bolt.
b. Wrap the band clamp around the seam
between the two filters.
c. Insert the ¼”-20 x 1” bolt with the ¼”-20 flat
washer through the hole on the band clamp
and tighten.
d. Place a ¼”-20 wing nut on the hex bolt and
tighten.
4. Place the stacked filters on top of the filter clean out
box.
5. Run a bead of clear silicone caulk around the base of the filters, where they meet the filter
clean out box, to ensure an airtight seal.
a. The silicone caulk will hold the filters securely in place and can be removed easily
by cutting the bead with a razor knife.
6. If you purchased a filter clean out box from us, it will be caulked once the filter stack is
installed.
Filter Clean Out Box available for purchase at
https://www.clearvuecyclones.com/
