9 Pentz EF5 Installation Guide
© Clear Vue Cyclones 2018
Assembling the Metal Stand
(for stand-mounted systems only)
1. Place the center frame for the stand on the floor.
2. Slide the (4) lower legs onto the center frame and
tighten the set screws.
3. Flip the stand over so the
lower legs are facing down.
4. Slide the (4) upper legs onto the center frame.
5. Slide the upper frame onto the upper legs.
6. Adjust the set screws to ensure stand is level.
It is recommended to bolt the stand to the floor to ensure it
does not move.
Upper Frame
Upper Legs
Center Frame
Lower Legs
