6
Clear Dash HD
Operating Instructions
Getting Started
1. Insert memory card into memory card
slot.
2. Mount unit on dash or window of vehicle
with camera lens facing the area to be
recorded.
Mounting to Dash with Suction Cup
a. Attach Safe Driving Dash Recorder
to the suction mount by sliding the
square mounting post into the mount
slot on the cam.
b. Locate a suitable position to mount
the dash cam. Do not obstruct
visibility for driving.
A smooth surface is needed for
suction cup to secure properly.
c. Make sure surface is clean as well as
suction cup.
d. Press suction cup to surface. Lock
lever in place.
e. Test mount to make secure. If loose,
repeat process.
3. Connect unit to power supply. Using
the power port cable, plug the USB
end into the X-3000 and the other end
into the Car Power port. The USB cable
can also be used to plug into the
X-3000 and a USB power adapter or
USB connection.
The red Charging light (7) will illuminate
and charge the unit’s battery while it
operates on the car’s electrical power.
The light will remain on while charging.
4. Unit should power up. If “Welcome”
screen does not appear, press and hold
ON/OFF (15) button for a few seconds
to turn on.
CDHD-X3000_IB_TP_ENG_V1_170302.indd 6
3/3/17 4:38 PM
