4
Customer Helpline 0345 077 8888
Installation
IMPORTANT ! - Ensure the table lamp is NOT
plugged into a mains supply socket before
attempting to assemble the table lamp.
Installation
1. Screw the fitting onto the base.
2. Place the metal shade over the lamp holder.
3. Screw the shade ring provided onto the lamp
holder and secure shade in place.
4. Screw the bulb (NOT SUPPLIED) into lamp
holders, making sure you do not exceed the
maximum wattage and bulb type stated on the
lamp holder.
5. Adjust the fitting to the required position.
6. Insert the plug into a suitable household socket.
7. Using in line on/off foot switch, switch on and test
the fitting.
REPLACEMENT LAMP
Maximum wattage – See Lamp holder
Light bulb shape - See Lamp holder
We recommend suitable low energy lamps only, see
below for example wattages :
5 watt = 25W
7 watt = 35W
9 watt = 45W
11 watt = 60W
15 watt = 75W
20 watt = 100W
Dimming of the luminaire is possible when use
halogen bulbs or dimmable low energy lamps.
3
2
1
4
5
6
7
ON/OFF SWITCH
5
