User manual
Made in Germany
Page 17
13.)
To mount and adjust a cartridge, please follow the user manual of the respective manufacturer.
14.)
The following final adjustment is very important:
Please ensure that your turntable rack is in a levelled position.
Please check with the bubble level gauge, if your
Master Innovation
turntable is in a levelled position.
You can adjust each of the turntables feet to get the turntable levelled.
Only if the turntable is in a levelled position you will get the best results with your
Master Innovation
turntable.
Pic. 18a:
Alignment of the turntable
Pic. 18b:
Adjustment of the height
15.)
Please connect the mains plug to your power supply.
16.)
By pushing the sensor switch, marked with “33 1/3” on
the motor, the turntable starts to spin until 33 1/3rpm is
reached.
After the initial setup we recommend to let the turntable
spin for at least 15 to 30 minutes.
This ensures a smoother break in.
Pic. 19:
Connection power supply and motor