User manual / Bedienungsanleitung
10
© clearaudio electronic GmbH, 2018/11
2.5.6 Adjustment of the Anti-Skating
You will find the Anti – skating adjustment wheel on the bottom of the tonearm (Pic. 13).
The factory installation is preset for a clearaudio MM cartridge at tracking force 2.4 grams and
marked with a black stripe on the bolt (view bottom up).
You can change your Anti-Skating:
Clockwise (max. 5 turns)= more Anti - Skating
Counter – clockwise (max. 5 turns) = less Anti - Skating
With 4 turns = Tracking force is 2.2 grams
With 3 turn = Tracking force is 2.4 gram
For a perfect Anti-Skating we recommend the
Clearaudio Test record (LPT43039) available at
www.analogshop.de or contact your nearest dealer or
distributor.
The general set-up is now finished.
Now you can connect your Verify tonearm now with
the phono input of your phono-preamplifier.
Attention:
Before the first use or after a long storage, please apply the lift unit up and down
approximately 4-5 times, so that the oil inside can dissolve in order that the lift unit can
move smoothly.
Pic. 13: Adjustment of the Anti-Skating