ClearCube Public Technical Document
Document Code: TB0208RD
Topic:
Component(s) Affected:
Date:
C7130 Auto-tune Addendum
C7130 C/Port
August 1, 2006
TB0208 rev 8/01/2006
ClearCube Technology
8834 Capital of Texas Hwy N Austin, Texas 78759
voice 512 652 3500 www.clearcube.com
TB0208.fm — C7130 Auto-tune Addendum
OVERVIEW / ENVIRONMENT
The C7130 Universal C/Port provides both Auto Equalization and Auto Delay Tuning. During the Auto
Delay Tuning, the incoming signals are equalized and then aligned to give minimum delay skew between
red, green, and blue video signals. In order for the Auto Delay Tuning to work most effectively, the Video
Sharpness Dial on the back of the C/Port (shown in
Figure 1
) should be positioned at the 12 o’clock posi-
tion, with the slot completely vertical, prior to plugging in the CAT5 cable.
If this is not done, the Auto Delay Tuning may not be completely effective, and there will be visible color
misalignment on the video.
For more information, please contact ClearCube technical support.
support@clearcube.com
Email address for ClearCube Technical Support
support.clearcube.com
ClearCube Support Website
(866) 652-3400
Direct line in the US
+1 (512) 652-3400
Direct line from outside the US
Figure 1
C7130, Back View
Video Sharpness Dial
set to 12 o’clock position
