Page 10 of 11
P/N G0200186 Rev A, 1.0.04.04.2017
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Configuring Zero Clients for VM Connections,
Continued
Configure zero
client
The table below shows how to bridge the mouse and keyboard connected to the Secure KM.
Step
Action
1
From a Web browser, open a zero client’s Web interface by entering one of the
IP addresses you recorded in the previous procedure (you can safely dismiss any
security-related prompts that browsers display).
2
Click
Log In
(by default, a password is not required).
3
From the main menu, click
Permissions > USB
to display the USB page.
4
From the Bridged Devices section, click
Add New
.
5
Enter
050D
in the Vendor ID text box and enter
104A
in the Product ID text box.
Click
Add
. The bridged device IDs are now shown above the Add new button.
6
Click the
Apply
button located at the bottom of the screen. A success message is
displayed.
7
To restart the zero client, click
Diagnostics > PCoIP Processor
and then click
Reset
. A message is displayed. Click
OK
.
This ends the PCoIP session with the zero client. Repeat this procedure for all
zero clients in the ClientCube 3.