Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • techsupport@clfd.net
10
FieldShield FLATdrop
Installation Manual
_________________________________________________________
Manual 018957 REV C - July 2022
1.
Open your cable to the desired breakout length.
Place the pieces of heatshrink over the end of the cable,
and push them down out of the way of the end of the jack
-
et. These will be utilized later to seal the FlexConnector.
2.
Place the two halves of the internal retaining clips around
the end of the cable jacket, with the end of the clips even
with the end of the cable jacket.
3.
Using a pliers, squeeze the two retaining clips together to
ensure the teeth bite into the jacket.
4.
Field Installable FlexConnector - Standrd FLATdrop